Model
|
VSR-11E |
VSR-11EH |
VSR-2E |
VSR-6E-1 |
|
VSR-3 |
VSR-1EM |
VSR-1E |
VSR-1EM
Introduction
|
• Tested for use with oxygen Inlets / Outlets(can be chosen): DIN: Germany CGA: USA BSP: British GB: China UNI: Italy NF: French JIS: Japan F2: 1/8" NPT(F) F4: 1/4" NPT(F) M4: 1/4" NPT(M) 02: 1/8" Tube fitting 04: 1/4" Tube fitting 06: 3/8" Tube fitting 6M: 6mm Tube fitting 8M: 8mm Tube fitting TW6M: 6mm Weld tube TW8M: 8mm Weld tube |
|
|
• Cylinder Gas Pressure Regulator with lightweight materials • Brass chrome plated or aluminium body and aluminium bonnet for inert, reactive, flammable and oxidizing gas and mixtures up to grade 6.0 • Stainless steel 316L body and aluminium bonner for corrosive gases • Accurate and stable pressure control • Minimal internal volume allows for rapid purging and carry-over • Various porting configurations are available |
Application
• Analyzers
• Lecture bottles
• Sampling systems
Technical parameters
| Type | single-stage |  |
| Inlet pressure P1 | max. 250 bar | |
| Outlet pressure P2 | 2/4/10 bar | |
| Materials | ||
| Body regulator | see ordering info | |
| Valve seat | PCTFE | |
| Diaphragm | Hastelloy® C276 | |
| O-ring | Viton® (FKM) | |
| (option)Kalrez® (FFKM) | ||
| Filter | SS 316L | |
| Inlets and Outlets | 1/8", 1/4"NPT(F) | |
| Temperature range | -30℃ to +74℃ | |
| Leak rate | (to atmosphere) 1x10^-6 mbar I/s He | |
| (via seat) | Bubble-tight | |
| Flow capacity | Cv=0.06 | |
| Weight | 0.47kg | |
Product picture
VSR-16M
Introduction
|
• Lightweight piston pressure reducer • The body is 6061 aluminum with anodized surface • Compact design, weight only 225g • Up to four 1/4 "NPT, or SAE threaded connectors • Stainless steel optional • Tested for use with oxygen Inlets / Outlets(can be chosen): F4：1/4"NPT(F) |
|
Application
• Corollary Equipment
• Component Testing
• Calibration Systems
• Laboratory Pressure Control
• Service & Test Equipment
Technical parameters
| Type | Regulators |
|
| Inlet Pressure： | Max. 300 bar | |
| Materials | ||
| Body | See ordering info | |
| Valve Seat | PCTFE / PEEK (Vespel® Option) | |
| O-ring | Viton® | |
| Inlets/Outlets | 1/4"NPT(F) | |
| Leak Rate | Cv=0.06 Bubble-tight | |
| Flow capacity | Cv=0.06 | |
| Weight | 0.2kg | |
VSR-1E
|
|
• Tested for use with oxygen Inlets / Outlets(can be chosen): DIN: Germany CGA: USA BSP: British GB: China UNI: Italy NF: French JIS: Japan F4: 1/4" NPT(F) M4: 1/4" NPT(M) 02: 1/8" Tube fitting 04: 1/4" Tube fitting 06: 3/8" Tube fitting 6M: 6mm Tube fitting 8M: 8mm Tube fitting TW6M: 6mm Weld tube TW8M: 8mm Weld tube |
|
• Cylinder pressure regulator • Brass chrome plated body and bonnet for inert, reactive, flammable and oxidizing gas and mixtures up to grade 6.0 • Stainless steel 316L body and bonnet for corrosive gases • 6 ports flexible configuration • Stable outlet pressure • Simple outlet pressure limitation by handwheel |
Application
• Component Testing
• Calibration Systems
• Laboratory Pressure Control
• High Pressure Sampling Systems
• Service & Test Equipment
Technical parameters
| Type | single-stage |
|
| Inlet pressure P1 | max. 300 bar | |
| Outlet pressure P2 | VAC/2/4/8/10/20 bar | |
| Materials | ||
| Body regulator | SS316L / chrome plated brass | |
| Valve seat | PCTFE | |
| Diaphragm | Hastelloy® C276 | |
| O-ring | Viton® (FKM) | |
| (option)Kalrez® (FFKM) | ||
| Filter | SS 316L | |
| Inlets and Outlets | 1/8", 1/4"NPT(F) | |
| Temperature range | -30℃ to +74℃ | |
| Leak rate | (to atmosphere) 1x10^-6 mbar I/s He | |
| (via seat) | Bubble-tight | |
| Flow capacity | Cv=0.07 | |
| Weight | 1.30kg | |
Product picture
VSR-2E
Introduction
|
|
• Tested for use with oxygen Inlets / Outlets(can be chosen): DIN: Germany CGA: USA BSP: British GB: China UNI: Italy NF: French JIS: Japan F4: 1/4" NPT(F) M4: 1/4" NPT(M) 02: 1/8" Tube fitting 04: 1/4" Tube fitting 06: 3/8" Tube fitting 6M: 6mm Tube fitting 8M: 8mm Tube fitting TW6M: 6mm Weld tube TW8M: 8mm Weld tube |
|
• Cylinder pressure regulator • Brass chrome plated body and bonnet for inert, reactive, flammable and oxidizing gas and mixtures up to grade 6.0 • Stainless steel 316L body and bonnet for corrosive gases • 6 ports flexible configuration • Stable outlet pressure • Simple outlet pressure limitation by handwheel • Inlet filter |
Application
• Component Testing
• Calibration Systems
• Laboratory Pressure Control
• High Pressure Sampling Systems
• Service & Test Equipment
Technical parameters
| Type | single-stage |  |
| Inlet pressure P1 | max. 300 bar | |
| Outlet pressure P2 | VAC/2/4/8/10/20/35/50 bar | |
| Materials | ||
| Body regulator | SS316L / chrome plated brass | |
| Valve seat | PCTFE | |
| Diaphragm | Hastelloy® C276 | |
| O-ring | Viton® (FKM) | |
| (option)Kalrez® (FFKM) | ||
| Filter | SS 316L | |
| Inlets and Outlets | 1/8", 1/4"NPT(F) | |
| Temperature range | -30℃ to +74℃ | |
| Leak rate | (to atmosphere) 1x10^-6 mbar I/s He | |
| (via seat) | Bubble-tight | |
| Flow capacity | Cv=0.08 | |
| Weight | 1.25kg | |
VSR-3
Introduction
• Cylinder Gas Pressure Regulator, special design for manifold application
• Brass chrome plated body and bonnet
for inert, reactive, flammable and oxidizing gas and mixtures up
to grade 6.0
• Stainless steel 316L body and bonnet for corrosive gases
• 6 ports flexible configuration
• Stable outlet pressure
• Simple outlet pressure limitation by handwheel
• Inlet filter
• Tested for use with oxygen
Inlets / Outlets(can be chosen):
F4: 1/4" NPT(F)
F6: 3/8" NPT(F)
F8: 1/2" NPT(F)
F12: 3/4" NPT(F)
08: 1/2" Tube fitting
12: 3/4" Tube fitting
TW12M: 12mm Weld tube
TW20M: 20mm Weld tube
Application
• Component Testing
• Calibration Systems
• Laboratory Pressure Control
• High Pressure Sampling Systems
• Service & Test Equipment
Technical parameters
| Type: | single-stage |
|
| Inlet pressure P1: | max. 300 bar | |
| Outlet pressure P2: | 2/4/8/10/20/35/50 bar | |
| Materials | ||
| Body regulator: | SS316L / chrome plated brass | |
| Valve seat: | PCTFE | |
| Diaphragm: | Hastelloy® C276 | |
| O-ring: | Viton® (FKM) | |
| (option)Kalrez® (FFKM) | ||
| Filter: | SS 316L | |
| Inlets and Outlets: | 1/8", 1/4"NPT(F) | |
| Temperature range: | -30℃ to +74℃ | |
| Leak rate: | (to atmosphere) 1x10^-6 mbar I/s He | |
| (via seat) : | Bubble-tight | |
| Flow capacity: | Cv=1.0 | |
| Weight: | 2.7kg | |
Product picture
VSR-6E
Introduction
|
• Tested for use with oxygen Inlets / Outlets(can be chosen): DIN: Germany CGA: USA BSP: British GB: China UNI: Italy NF: French JIS: Japan F4: 1/4" NPT(F) M4: 1/4" NPT(M) 02: 1/8" Tube fitting 04: 1/4" Tube fitting 06: 3/8" Tube fitting 6M: 6mm Tube fitting 8M: 8mm Tube fitting TW6M: 6mm Weld tube TW8M: 8mm Weld tube |
|
|
• Diaphragm design high pressure piston regulator • Brass chrome plated body and bonnet for inert, reactive, flammable and oxidizing gas and mixtures up to grade 6.0 • Stainless steel 316L body and bonnet for corrosive gases • 6 ports flexible configuration • Stable outlet pressure • Simple outlet pressure limitation by handwheel • Inlet filter |
Application
• Component Testing
• Calibration Systems
• Laboratory Pressure Control
• High Pressure Sampling Systems
• Service & Test Equipment
Technical parameters
| Type | single-stage |
|
| Inlet pressure P1 | max. 300 bar | |
| Outlet pressure P2 | 50/100/200 bar | |
| Materials | ||
| Body regulator | SS316L / chrome plated brass | |
| Valve seat | PCTFE | |
| Diaphragm | Hastelloy® C276 | |
| O-ring | Viton® (FKM) | |
| (option)Kalrez® (FFKM) | ||
| Filter | SS 316L | |
| Inlets and Outlets | 1/8", 1/4"NPT(F) | |
| Temperature range | -30℃ to +74℃ | |
| Leak rate | (to atmosphere) 1x10^-6 mbar I/s He | |
| (via seat) | Bubble-tight | |
| Flow capacity | Cv=0.15 | |
| Weight | 1.20kg | |
Product picture
VSR-11E
Introduction
|
• Tested for use with oxygen Inlets / Outlets(can be chosen): DIN: Germany CGA: USA BSP: British GB: China UNI: Italy NF: French JIS: Japan F4: 1/4" NPT(F) M4: 1/4" NPT(M) 02: 1/8" Tube fitting 04: 1/4" Tube fitting 06: 3/8" Tube fitting 6M: 6mm Tube fitting 8M: 8mm Tube fitting |
|
|
• Dual stage pressure regulator • Brass chrome plated body and bonnet for inert, reactive, flammable and oxidizing gas and mixtures up to grade 6.0 • Stainless steel 316L body and bonnet for corrosive gases • Stable outlet pressure • Inlet filter • Simple outlet pressure limitation by handwheel |
Application
• Component Testing
• Calibration Systems
• Laboratory Pressure Control
• High Pressure Sampling Systems
• Service & Test Equipment
Technical parameters
| Type | Dual-stage |
|
| Inlet pressure P1 | max. 300 bar | |
| Outlet pressure P2 | 2/4/8/10/20 bar | |
| Materials | ||
| Body regulator, Relief valve | SS316L / chrome plated brass | |
| Valve seat | PCTFE | |
| Diaphragm | Hastelloy® C276 | |
| Filter | SS 316L | |
| Inlets and Outlets | 1/4" NPT(F) | |
| Temperature range | -30℃ to +74℃ | |
| Leak rate | (to atmosphere)1x10-8 mbar I/s He | |
| (Via seat)1x10-6 mbar I/s He | ||
| Flow capacity | Cv=0.07 | |
| Weight | 2.10kg | |
Product picture
VSR-11EH
Introduction
|
|
• Tested for use with oxygen Inlets / Outlets(can be chosen): DIN: Germany CGA: USA BSP: British GB: China UNI: Italy NF: French JIS: Japan F4: 1/4" NPT(F) M4: 1/4" NPT(M) 02: 1/8" Tube fitting 04: 1/4" Tube fitting 06: 3/8" Tube fitting 6M: 6mm Tube fitting 8M: 8mm Tube fitting |
|
• Dual stage Cylinder Gas Pressure Regulator • Brass chrome plated body and bonnet for inert, reactive, flammable and oxidizing gas and mixtures up to grade 6.0 • Stainless steel 316L body and bonnet for corrosive gases • Stable outlet pressure • Inlet filter • Simple outlet pressure limitation by handwheel |
Application
• Component Testing
• Calibration Systems
• Laboratory Pressure Control
• High Pressure Sampling Systems
• Service & Test Equipment
Technical parameters
| Type | Dual-stage |
|
| Inlet pressure P1 | max. 300 bar | |
| Outlet pressure P2 | 50/100/200 bar | |
| Materials | ||
| Body regulator, Relief valve | SS316L / chrome plated brass | |
| Valve seat | PCTFE | |
| Diaphragm | Hastelloy® C276 | |
| Filter | SS 316L | |
| Inlets and Outlets | 1/4" NPT(F) | |
| Temperature range | -30℃ to +74℃ | |
| Leak rate | (to atmosphere)1x10^-8 mbar I/s He | |
| (Via seat)1x10-6 mbar I/s He | ||
| Flow capacity | Cv=0.15 | |
| Weight | 2.10kg | |
Hot Tags: cylinder gas pressure regulator, China cylinder gas pressure regulator manufacturers, suppliers, gas regulator for cylinders, gas regulator for developer, Brass Gas Pressure Regulator flow control low pressure, gas regulator for reliability, High Pressure High Flow Regulator dual stage nitrogen, high pressure gas regulator
